 | |
Protection class: | II |
Width: | 110.000 mm |
Outer diameter: | 110.000 mm |
Reflector: | None |
Lamp holder: | Other |
Connection type: | Push-in clamp |
Colour housing: | White |
Surface protection: | Lacquered |
Voltage type: | AC |
With movement sensor: | false |
Suitable for lamp power: | 8.000 W |
Type of control gear: | LED operating device current-controlled |
Colour rendering index CRI: | 90-100 |
With light sensor: | false |
Suitable for suspended mounting: | false |
Number of poles: | 2.000 |
Material housing: | Plastic |
Lamp type: | LED not exchangeable |
Light outlet: | Direct |
Light sharing: | Symmetric |
Material cover: | Plastic matt/satinized |
Impact strength: | IK02 |
Nominal voltage: | 230.000 V |
Degree of protection (IP): | IP44 |
With light source: | true |
Covering of the luminaire with thermally insulating material possible: | false |
Suitable for number of lamps: | 1.000 |
Suitable for built-in mounting: | true |
With control gear: | false |
Suitable for surface mounting: | false |
Beam angle: | Extreme wide beam >80° |
Surface brushed: | false |
Colour temperature: | 3000.000 K |
Max. system power: | 8.000 W |
Colour of light: | White |
Adjustability: | Not adjustable |
Suitable for traverse mounting: | false |
Suitable for pedestal/floor mounting: | false |
Suitable for light-track mounting: | false |
Suitable for clamp-mounting: | false |
Luminous flux: | 650.000 lm |
Type of wiring: | Ending |
Colour consistency (McAdam ellipse): | SDCM1 |
Photobiological safety according to EN 62471: | RG0 |
Rated ambient temperature according to IEC62722-2-1: | -10.000 °C | 4.000 °C |
Filament test according to IEC 60695-2-11: | 650 °C - 30 s |
Dimming phase cut-off: | true |
Dimming phase cut-on: | true |
Light distributor: | Diffuser lens/optic/panel |
Luminaire efficacy: | 82.000 lm/W |
Suitable for low voltage cable system: | false |
Suitable for ceiling mounting: | true |
Power factor: | 0.900 |