|  |
| |
| Artikelnr.:
8LSXD-35575601 Fabrikantnr.:
35575601 EAN/GTIN:
4067201228189 |
| | |
|
| | |
|
Material: Polyketone resin, die-cast, ivory-colored.
Shaft angle 90°. Version: injection-moulded. Bores from Module 1.5
machined.
Lower friction leads to much larger lifespan, even without lubrication.
Much higher safety against tooth breaking, specially at longterm usage.
Temperature Range: -40°C to +140°C, due to the load.
Note for ordering: The bevel gears only run as a pair at the
stated ratio. These gears are sold singulary, not by pair. For a pair of
bevel gears, you have to order two matching gears of the same module and
ratio. At ratio 1:1, you need two pieces of the same number of teeth. At
ratio uneven 1:1, you need two pieces with a different number of teeth
of the same ratio.
Note Regarding the Gears Made of Polyketone Resin: Inside these
die-cast parts are some cavities caused by production. These parts
should therefore not be drilled too deep. With larger bores or when
grooving the cavities might become visible. This often does not affect
the functionality.
Meer informatie: | | Material: | Plastic die-cast (Polyketone, up to 140°C) | Surface: | Blank | Ratio i: | 2:1 (15/30) | Module: | 1,5 | No. of teeth: | 15 | Outer diameter d<sub>a</sub>: | 25,4 [mm] | d: | 22,5 [mm] | ND: | 17 [mm] | NL: | 11,5 [mm] | L<sub>1</sub>: | 22,8 [mm] | L: | 22,8 [mm] | b: | 10,5 [mm] | B: | 8 [mm] | E: | 35,8 [mm] | Max. torque MD: | 45 [Ncm] | Weight: | 6,7 [g] | optional counter wheel (Part-No.): | 35575701 |
|
| | |
| | | |
| | | |
| |