Raytech Gel Filled Cable Joint Kit, Straight Joint Type , 4 x 16 → 50mm²

CEI EN 50393; CEI 20-33 Class 2 in accordance with CEI 64-8 Degree of protection higher than IP68 in accordance with IEC 529. 1 x closure with phase separator, 1 x cable tie, sealing tape, bag of Magic Fluid, instructions. Splices/ Connectors should be ordered separately to suit the cable type or application. Magic Joint Cable Jointing Kit. The Raytech Magic Joint is a cable joint suitable for extruded 0.6/1 kV cables. It is easy to install and is formed by two plastic half shells that, once closed on the cable after conductor connection, are then filled with the magic fluid. This cable jointing kit is ideal for installations in ducts or traps underground, submerged or directly exposed to the weather. Magic joint has no shelf life, is safe, non toxic and re-enterable even after long working periods. Fast in cross linking without any increase of temperature, the insulation has high dielectric characteristics. No shelf life Completely non toxic Cure time less than 10 minutes at room temperature Joints are re-enterable even after log working periods Degree of protection higher than IP68 Can be installed under water at any depth Can be used safely in unventilated and confined areas