| |
|
| Artikelnr.: 2949E-5377888 Fabrikantnr.: RCDT320-FR EAN/GTIN: geen gegevens |
| |
|
| | |
| RCDT320 differential circuit breaker tester. Differential circuit breaker tester that meets the requirements of NFC 15-100, EN6557-3 and IEC 61010 for testing low-voltage electrical wiring. 0 ° or 180 ° polarity selection. Selectable touch voltage and display on the analogue arc. 300 Vac voltage measurement range. 3-phase safe (the device will remain safe, even if it is connected across phases). Mains voltage measurement. Large digital display with a true analogue response. The rigid display cover folds out of the way during testing and locks down to protect the display when finished. Test locking - prevents testing when mains voltage exceeds 300 V. Supplied with a 3-wire test lead set fitted with crocodile clips, a mains plug test lead, 8 x AA rechargeable alkaline batteries and a hard carry case. Sealing: IP54. IEC 61010-1 compliant for safe use at 440 V on installations classified as Cat. III 600 V or Cat. IV 300 V. Meer informatie: | | Loop Impedance Test Type: | 3 Wire | Test Equipment Type: | RCD Tester | Maximum Voltage Measurement: | 300V ac | RCD Test Type: | DC | RCD Test Current: | 1000mA | Safety Category: | CAT III 300V | Display Type: | LCD | Battery Life: | 2000 Tests | Battery Type: | AA | Power Source: | Battery | Dimensions: | 203 x 148 x 48mm | Weight: | 980g | Height: | 78mm | Length: | 203mm | Maximum Operating Temperature: | +40°C |
|
| | |
| | | |
| Andere zoekwoorden: Isolatietester, Isolatietesters, Isolatieweerstandsmeter, Isolatieweerstandsmeters, Lusimpedantiemeter, Lusimpedantiemeters, Loop impedance tester, Loop impedance testers, isolatieweerstandsmeter megger, loop impedance tester, 5377888, Test & Measurement, Electrical Test & Measurement, Loop & RCD Testers, Megger, RCDT320FR |
| | |
| |