ELC GF467F Function Generator, 0.01Hz Min, 5MHz Max, FM Modulation, Variable Sweep

Safety: EN 61010-1, Surge category II, pollution level 2. EMC: EN 61000-6-1 and EN 55011, class B. Function generators 0.01 Hz → 5 MHz, protected, RS232 / GF467F. GF 467F. Function generator 0.01 Hz → 5 MHz. Display: 5 digits, 14-mm red LED display. Functions: Triangle, sine, square, offset, internal linear or logarithmic sweep, external wobulation VCF or FM modulation, AM modulation, CMOS. Frequency range: 0.01 Hz → 5 MHz in 8 ranges. Frequency adjustment: Coarse setting button + fine control (10% of coarse setting). Offset voltage independent of the attenuator. Waveform characteristics: Sine-wave distortion: ; 1% and harmonics ; -30 dB. Triangle linearity error: 1% max (up to 100 KHz). Square-wave signal rise or fall times: 30 ns max (10 → 90%). Duty cycle: Calibrated: to 50% ±1%. Variable: continuously from 20 to 80% on all ranges and for all waveforms. Frequency sweep: Internal: Linear or logarithmic, sweep time adjustable from 10 ms → 5 s and depth adjustable from 1 → 100. External: Input on BNC socket, Input impedance: 47 Kohms ±10%, Bandwidth: DC → 20 KHz. Frequency meter: Frequency range: 0 Hz → 50 MHz in 8 automatic ranges. Reciprocal reading for very low frequencies. External input: Impedance: 1 Mohms / 20 pF Typical sensitivity: 10 mV rms Direct reading of the frequency in internal position. Accuracy at 100 KHz: ±0.025% ±1 digit. 50 ohms and TTL output protected against reverse power surges of up to ±60 V. All inputs and outputs are protected against power surges of up to ± 60 V. LABVIEW interface. GF 467AF. Also features a protected 0.5 ohm output supplying 15 W at 4 ohms.