Protimeter BLD9800-S Moisture Meter, 99 % RH Max, LCD Display, Battery-Powered

PROTIMETER - MMS2 SURVEY BLD8800-S & BLE BLD2025 Protimeter BLD8800 MSS2 Survey & BLE BLD2025, IP65 Compact wall mountable data-logging device, RH Relative humidity, temperature and moisture content with Bluetooth communication Product Details The attachments aren’t just included, they’re built in. The Protimeter MMS2 is the industry’s most advanced all-in-one moisture meter. Its ergonomic, 4-in-1 design allows one-handed operation to measure moisture on and below the surface as well as ambient air humidity. An infrared thermometer which calculates the difference between dew point and surface temperature, is just one of the many advances designed to assess moisture in new/refurbishing projects and help diagnose moisture-related problems in existing buildings. - Built-in pin probes - Non-invasive moisture detection up to 19mm below surface - Simple to use 2-button operation - Easy to read LED and LCD Display - Complete with nylon carry pouch, remote pin probe, deep wall probes - Calibration check device included to quickly check functionality Materials this moisture meter can be used on? - Wood - Drywall - Building Materials - Concrete - Fiberglass Boat Hulls Typical Applications: - Concrete Floors - Wood Floors - Building Survey - Building Construction - HVAC Commissioning - Home Inspection - Flood Damage Restoration - Industrial Coatings Specifications: Moisture measurement range - Pin (% WME) 8% to 99, readings over 30% are relative Non-invasive (RF) up to 19 mm deep 60 to 1000 (relative) Temperature probe range - -10 - 50°C HygroStick data (nominal) - 30% to 40% RH (3% RH) at 68F (20°C), 41% to 98% RH (2%) at 68°F (20°C), Range 32°F to 122°F (0°C to 50°C) 0.6°F (0.3°C) Quickstick Data (Nominal) - 0% to 10% RH, 3% RH at 68°F (20°C), 10% to 90% RH, 2% RH at 68°F (20°C), 90% to 100% RH, 3% RH at 68°F (20°C), Range 32°F to 122°F (0°C to 50°C) 0.6°F (0.3°C) Nominal response 30% to 90% and back to 30% RH in 45 seconds @ 68°F (20°C) Data Storage - Up to 1,000 results with date and time stamp from all instrument functions Gross weight – Meter with battery 178gms Dimensions (L x W x H) – 180mm x 70mm x 49mm Maximum needle depth – 10mm Display – Colour LCD Batteries (Included) – 9V Warranty – 24 months on mechanical or manufacturing defects. Does not include wearing part or accessories Protimeter BLE – BLD2025 Protimeter BLE BLD2025, IP65 Compact data-logging device, RH Relative humidity, temperature and moisture content with Bluetooth communication A compact device that offers precise measurements and logs (RH) relative humidity, room temperature and moisture content WME (WME – water moisture equilibrium / content) in wood and building material when it is inserted into the material via two screws which are included in the pack. The BLE unit is IP65, dust and waterproof. A simple Bluetooth pairing to your device allows data capture of up to 1000 readings at customised intervals that can be viewed remotely through the Protimeter BLE App. IOS and Android app available for free download Materials this moisture meter can be used on? - Plasterboard - Soft wood - Hard wood - Brick - Lime Render Typical Applications: - Long and short-term monitoring of a building’s moisture health - Early warning of potential mould problems - Monitor environmental conditions over the long-term to help protect buildings of artefacts - Measure moisture content in a range of building materials, including wood and drywall Specifications: Dimensions: (H x W x D) 53 mm x 67 mm x 23 mm Product Weight: 0.06 kg Storage Conditions: Temperature: -40°C to +50°C Operating Conditions: Temperature: -20°C to +50°C / Humidity: 0-100% Environmental Protection: IP65 (Dust and Water Jet Protected) Relative Humidity: Humidity: 0-100% / Accuracy: 20-80% RH +/-2% Moisture Content: Accuracy: 8-30% WME +/-1% (+/-3% accuracy outside this range) RF: Low-powered Bluetooth (BLE) - Bluetooth range up to 10M depending on surrounding building structures Power: Battery CR2450 (replaceable) / Battery life depends on logging interval set within the app. Protimeter BLE App: Available for free download from the Apple App Store and Google Play. Included in the package – MMS2, QuikStick short, HygroStick, HygroStick extension lead, heavy duty moisture probe, deep wall probe 127mm, calibration checker, Software & download cable and BLE data logger device in hard protective case