|  |
| |
| Artikelnr.:
2949E-1868834 Fabrikantnr.:
MC100EPT26DTG EAN/GTIN:
geen gegevens |
| |
|
| | |
| The MC100EPT26 is a 1:2 Fanout Differential LVPECL to LVTTL translator. Because LVPECL (Positive ECL) levels are used only +3.3V and ground are required. The small outline 8-lead SOIC package and the 1:2 fanout design of the EPT26 makes it ideal for applications which require the low skew duplication of a signal in a tightly packed PC board. The VBB output allows the EPT26 to be used in a single-ended input mode. In this mode the VBB output is tied to the D0bar input for a non-inverting buffer or the D0 input for an inverting buffer. If used, the VBB pin should be bypassed to ground via a 0.01 uF capacitor.1.4ns Typical Propagation Delay Maximum Frequency > 275 MHz Typical The 100 Series Contains Temperature Compensation Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V Open Input Default State Safety Clamp on Inputs 24mA TTL outputs Q Outputs will default LOW with inputs open or at VEE VBB Output Meer informatie: | | Mounting Type: | Surface Mount | Package Type: | TSSOP | Output Type: | TTL | Pin Count: | 8 | Dimensions: | 3.1 x 3.1 x 1.95mm | Logic Function: | Translator | Maximum Low Level Output Current: | 24mA | Maximum High Level Output Current: | -3mA | Propagation Delay Test Condition: | 20pF | Maximum Operating Supply Voltage: | 3.6 V | Maximum Propagation Delay Time @ Maximum CL: | 4.1 ns @ 20 pF | Maximum Operating Temperature: | +85 °C | Minimum Operating Supply Voltage: | 3.6 V | Minimum Operating Temperature: | -40 °C |
|
| | |
| | | |
| Andere zoekwoorden: 1868834, Semiconductors, Logic ICs, Translator ICs, onsemi, MC100EPT26DTG |
| | |
| |