|  |
| |
| Artikelnr.:
2949E-1843079 Fabrikantnr.:
RP-VC1 EAN/GTIN:
geen gegevens |
| |
|
| | |
| DesignSpark Camera ModuleThe DesignSpark camera module by Entaniya enables the use of M12 mount lenses with your Raspberry Pi. The lens is optimised for daylight use with the inclusion of an Infra-Red (IR) filter within the lens. This module is supplied pre-assembled with a Raspberry Pi v2 camera, M12 mount and 220° fish-eye lens. This camera has interchangeable lenses and there is a possibility that dust may adhere to the sensor. Therefore, it is recommended to blow off the dust regularly.Features and BenefitsImage resolution is 3280 pixel x 2464 pixel Video resolution is 1920 pixel x 1080 pixel Sony IMX219PQ sensor 8 megapixel fixed focus RP-220 lensApplicationsAutomation Robotics Embedded developmentCertificationsANSI/ESD S20.20:2014 BS EN 61340-5-1:2007 Meer informatie: | | Type: | Camera Module | Supported Video Ports: | Raspberry Pi | Number of Channels: | 1 | Supported Bus Interfaces: | CSI-2 | Maximum Supported Resolution: | 1920 x 1080 pixels | Maximum Frame Rate (Capture): | 30fps | Dimensions: | 35 x 22 x 21.7mm | Height: | 21.7mm | Length: | 35mm | Maximum Operating Temperature: | +60 °C | Minimum Operating Temperature: | -20 °C | Width: | 22mm |
|
| | |
| | | |
| | | |
| |