|  |
| |
| Artikelnr.:
2949E-1771916 Fabrikantnr.:
MCP2562FD-H/SN EAN/GTIN:
5059045527022 |
| |
|
| | |
| The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pinSupports 1 Mb/s operation Implements ISO-11898-5 standard physical layer requirements Very low standby current (Typ: 5μA) VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus Power-on Reset and voltage brown-out protectionon VDD and VIO pin Meer informatie: | | Maximum Data Rate: | 8Mbps | Number of Transceivers: | 1 | IC Type: | CAN Transceiver IC | Standard Supported: | ISO 11898-2, ISO 11898-5 | Power Down Mode: | Normal, Standby | Maximum Supply Current: | 70 mA | Mounting Type: | Surface Mount | Package Type: | SOIC | Pin Count: | 8 | Dimensions: | 4.9 x 3.9 x 1.5mm | Length: | 4.9mm | Width: | 3.9mm | Height: | 1.5mm | Maximum Operating Supply Voltage: | 5.5 V | Maximum Operating Temperature: | +150 °C |
|
| | |
| | | |
| | | |
| |