|  |
| |
| Artikelnr.:
2949E-1653553 Fabrikantnr.:
MCP130-450DI/TO EAN/GTIN:
5059040116214 |
| |
|
| | |
| MCP130 Microcontroller Supervisory and Reset Circuit. The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor. Features. Holds Microcontroller in Reset until supply voltage reaches stable operating level Resets Microcontroller during power loss Active low RESET pin Open drain output Internal 5 kΩ Pull-Up Resistor Holds RESET for 350 ms (typical) RESET to VCC = 1.0V Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature 45 μA typical operating current Meer informatie: | | Number of Supervisors: | 1 | Output Driver: | Active Low, Open Drain | Maximum Reset Active Time: | 700ms | Mounting Type: | Through Hole | Package Type: | TO-92 | Pin Count: | 3 | Dimensions: | 4.71 x 3.62 x 4.62mm | Maximum Monitored Voltage: | 4.5V | Maximum Operating Supply Voltage: | 5.5 V | Maximum Operating Temperature: | +85 °C | Minimum Monitored Voltage: | 4.37V | Minimum Operating Supply Voltage: | 1 V | Minimum Operating Temperature: | -40 °C |
|
| | |
| | | |
| | | |
| |