TE Connectivity Amplimite HDE-20 15 Way Cable Mount D-sub Connector Socket, 2.768mm Pitch

AMPLIMITE HDE-20 Series, IDC, All-Plastic, Cable Mount D-Sub Connectors. AMPLIMITE HDE-20 All-Plastic IDC d-sub cable mount plug and receptacle connectors for discrete wire and jacketed cable. These HDE-20 IDC d-sub cable mount IDC connectors have a 94V-0 rated black thermoplastic housing and are pre-loaded with duplex plated phosphor bronze IDC contacts with gold on the mating end and tin on the crimping end. (stock numbers ; 718-4751 718-4751 , ; 782-9568 782-9568 , ; 822-5033 822-5033 and ; 822-5036 822-5036 have 0.00076 μm gold plating. Stock numbers ; 718-4776 718-4776 and ; 822-5024 822-5024 have gold flash). The contacts for these HDE-20 IDC all-plastic d-sub connectors accept a wire size of 26-22 AWG. The maximum wire insulation thickness that these contacts accept is 0.38mm, and the maximum wire insulation diameter is 1.52mm. The HDE-20 series of IDC d-sub cable connectors will mate with the HDP and HD-20 board mount range of d-sub connectors. For suitable cable clamps or backshells please see stock numbers ; 680-9301 680-9301 , ; 680-9305 680-9305 , ; 719-9747 719-9747 and ; 717-4631 717-4631 typically. For suitable female screwlocks and male screw retainers please see stock numbers ; 450-9258 450-9258 , ; 717-4473 717-4473 , ; 680-9358 680-9358 and ; 680-9333 680-9333 typically. For locking post assembly see stock number ; 450-9365 450-9365 For latching blocks with threaded hole see ; 450-9371 450-9371 and ; 717-4656 717-4656 ; F F or latching blocks with slot recess and thru' hole see stock number ; 680-9392 680-9392