GlobalSat GTR-129 Vehicle-Tracker (GPS/GSM, IP67, Motion-Sensor, Battery, SMS/TCP/UDP)

Aantal:

verpakking

Artikelnr.:
2072N-1673

Fabrikantnr.:
GTR-129

EAN/GTIN:
0613165217673

GTR-129 is designed as durable and multi-functional GPS/GSM/GPRS tracker. Compact, robust and waterproof design for motorcycle, car, electric scooter, golf cart, truck and boat/yacht. You can track the position through a free-to-use web portal. In addition there is a programming-interface available for integrating the tracker into your own applications.

Features :
- High Sensitivity GPS Receiver
- Compact size and Waterproof IP67 design
- Built-in high sensitivity GPS/GSM antennas
- Quad-Band GSM System (850/900/1800/1900MHZ)
- Built-in motion sensor
- AGPS support
- Support communication protocols- SMS/TCP/UDP
- Multiple I/Os support: 1 Digital Input for custom function, 1 Digital input for optional Emergency button, 1 Analog Input, 1 Digital Output for Relay, 1 Digital Input for ACC detection
- Configuration and firmware update via Over-The-Air
- Alert functions including Power low/ Over speed/ Movement alarms
- Tracking by preferred interval, scheduling and Geofence
- Multiple power Solutions
- Low power consumption (eg. 10mAh with 15min report interval)

Scope of supply:
- GTR-129 Device
- 8-pin Hard wire power & I/O cable
- Velcro Tape
- Quick start guide

Quad Band 850/900/1800/1900 MHz | L1, 1575.42 MHz

Built-in Pi-Fa antenna | Built-in patch ceramics antenna

Hot start : < 1 sec, avg., Warm start : 33 sec, avg., Cold satrt : 33 sec, avg., Reacquisition : 0.1sec

Operating : -30° to 60°C, Storage : -40° to 60°C, Humidity : 5-95% Non-condensing

Ignition (ACC), 1x Emergency button input, 1x Digital Input, 1x Digital Output, 1x Analog input (0-28V)

Normal mode:, Red blinking: Device is under booting and SIM-PIN not ready, Red solid: SIM PIN Ready but GSM not registered, Yellow solid: GSM registered, but GPRS not connected, Green solid: GSM registered, and GPRS connected, Hiding mode:, Red blinking: Device is under booting, After complete the boot, turn off all LEDs.

Built-in Motion sensor