sensata / cynergy3  (885 artikelen gevonden)

Pump Protection Switch. Fits to pump body or pipe work (pipe diameter 20 to 200mm) A rapid rise past the set-point temperature of 45°C (if the inlet water level falls below the centre line of the i...

SSF67PM12 Series Level Float. These SSF67 series floats from Cynergy 3 have been designed to provide different switching options with a longer reach float. The float is made with stainless steel 31...

This float switch is designed for internal fitting inside a tank. The float switch is fitted in a 16.5 mm dia. hole in the tank from the inside and secured by a nylon nut on the outsidePP material ...

Reed Operating Magnets. For use with reed switches

Form A ; C Reed Switches. Suitable for use with location sensors, proximity switches and level switches at low to medium voltages and current Electrical Life 10 ;sup>5 ;/sup> - 10 ;sup>6 ;/sup> Swi...

Not to be used in any chlorinated liquids. Normally Open Flow Switch. Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in ...

The cable entry point must NOT under any circumstances be submerged. On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside. On the Vertical t...

cynergy3 RSF100 Vertical Float Switches. RSF100 series float switches from cynergy3 are a range of miniature vertical float switch. These float switches require external mounting and feature a sing...

Form A ; C Reed Switches. Suitable for use with location sensors, proximity switches and level switches at low to medium voltages and current Electrical Life 10 ;sup>5 ;/sup> - 10 ;sup>6 ;/sup> Swi...

The cable entry point must NOT under any circumstances be submerged. On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside. On the Vertical t...

Form A ; C Reed Switches. Suitable for use with location sensors, proximity switches and level switches at low to medium voltages and current Electrical Life 10 ;sup>5 ;/sup> - 10 ;sup>6 ;/sup> Swi...

The cable entry point must NOT under any circumstances be submerged. On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside. On the Vertical t...

Form A ; C Reed Switches. Suitable for use with location sensors, proximity switches and level switches at low to medium voltages and current Electrical Life 10 ;sup>5 ;/sup> - 10 ;sup>6 ;/sup> Swi...

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads. Cynergy3 Horizon...

Contact Configuration = SPST Maximum Switching Current = 500mA Maximum Switching Power = 10W Maximum Switching Voltage = 150V ac/dc Contact Resistance = 150mΩ Contact Material = Rhodium Maximum Rel...