|  | | | | | | Afbeelding | | | | Bestellen | | |
36059200 bevel gear steel m.1,0 teeth15 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 31,14*
per stuk |
| |
36059300 bevel gear steel m.1,0 teeth60 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 76,74*
per stuk |
| |
36079200 bevel gear steel m.1,5 teeth15 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 34,63*
per stuk |
| |
36079300 bevel gear steel m.1,5 teeth60 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 92,07*
per stuk |
| |
36109200 bevel gear steel m.2,0 teeth15 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 81,93*
per stuk |
| |
36109300 bevel gear steel m.2,0 teeth60 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 216,05*
per stuk |
| |
36119200 bevel gear steel m.2,5 teeth15 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 58,82*
per stuk |
| |
36119300 bevel gear steel m.2,5 teeth60 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 252,41*
per stuk |
| |
36149200 bevel gear steel m.3,0 teeth15 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 71,50*
per stuk |
| |
36149300 bevel gear steel m.3,0 teeth60 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 274,86*
per stuk |
| |
36189200 bevel gear steel m.4,0 teeth15 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 95,15*
per stuk |
| |
36189300 bevel gear steel m.4,0 teeth60 i=4:1 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 384,12*
per stuk |
|
|
