|  | | | | | | Afbeelding | | | | Bestellen | | |
36144400 bevel gear steel m.3,0 teeth16 i=1,25 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 65,65*
per stuk |
| |
36144500 bevel gear steel m.3,0 teeth20 i=1,25 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 74,21*
per stuk |
| |
36184400 bevel gear steel m.4,0 teeth16 i=1,25 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 121,84*
per stuk |
| |
36184500 bevel gear steel m.4,0 teeth20 i=1,25 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 140,86*
per stuk |
| |
36214400 bevel gear steel m.5,0 teeth16 i=1,2 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 136,77*
per stuk |
| |
36214500 bevel gear steel m.5,0 teeth20 i=1,2 (1 zoekresultaat) Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened –, not lapped. Shaft angle = 90°.... |
|
€ 170,80*
per stuk |
|
|
