Magazijn 8LSXD  (2.291 artikelen)

Helical Gear Boxes BT1 with Two Shaft Ends, 2-Stage  (184)

• Helical Gear Boxes BT1 with Two Shaft Ends, Size 1, up to 50 Nm
• Helical Gear Boxes BT1, Size 2, up to 100 Nm
• Helical Gear Boxes BT1, Size 3, up to 200 Nm
• Helical Gear Boxes BT1, Size 4, up to 300 Nm
• Helical Gear Boxes BT1, Size 5, up to 450 Nm
• Helical Gear Boxes BT1, Size 6, up to 700 Nm

Bevel Gearboxes  (290)

• Angular Drive OW3 Version 20, Ratio 1:1
• Angular Drive OW3 Version 30 L, Ratio 1:1
• Angular Drive OW3 Version 30 R, Ratio 1:1
• Bevel Gearboxes HUG, up to 0,68 Nm, i=1:1
• Bevel Gearboxes KEK Version A, up to 10 Nm
• Bevel Gearboxes KEK Version B, up to 10 Nm
• Bevel Gearboxes MKU, Model K, up to 16 Nm, i=1:1 up to 4:1
• Bevel Gearboxes MKU, Model L, up to 16 Nm, i=1:1 up to 4:1
• Bevel Gearboxes MKU, Model H, up to 16 Nm, i=1:1 up to 4:1
• Bevel Gearboxes DZA / DZR, up to 60 Nm
• Toon alle

Frequency Inverters NES1 (for 3-phase current Drives)  (8)

Servo Worm Gear Units ZM/S  (93)

• Servo Worm Gear Units ZM/S, Shrink disk Side 5
• Servo Worm Gear Units ZM/S, Shrink disk Side 6
• Servo Worm Gear Units ZM/S, Motor Adaptation

Worm Gear Screw Jacks NPT, with Trapezoidal Thread  (77)

• Worm Gear Screw Jacks NPT, with Trapezoidal Thread, Version A: Standard version
• Cardan Adapter KARA for Flanged Nuts
• Worm Gear Screw Jacks NPT, with Trapezoidal Thread, Version B: With anti-rotation guide
• Adapter Console KONA for Flanged Nuts
• Worm Gear Screw Jacks NPT, with Trapezoidal Thread, Version C: Travelling nut version
• Fastening strips for NPT and NPK
• Swivel plate for NPT and NPK
• Swivel feet for swivel plate, for NPT and NPK
• Flange Plate for NPT and NPK, Version A and B
• Travelling Nut for NPT Version C, with Trapezoidal Thread

Motor controller SFRG 06 for Brushed DC- and Brushless BLDC-Drives  (1)

Standard Three-Phase Motors SM/I, 230/400 V, 50 Hz  (78)

• Standard Three-Phase Motor SM/I, B3, 2-pole, 3000 rpm
• Standard Three-Phase Motor SM/I, B3, 4-pole, 1500 rpm
• Standard Three-Phase Motor SM/I, B3, 6-pole, 1000 rpm
• Standard Three-Phase Motor SM/I, B3, 8-pole, 750 rpm
• Standard Three-Phase Motor SM/I, B5, 2-pole, 3000 rpm
• Standard Three-Phase Motor SM/I, B5, 4-pole, 1500 rpm
• Standard Three-Phase Motor SM/I, B5, 6-pole, 1000 rpm
• Standard Three-Phase Motor SM/I, B5, 8-pole, 750 rpm

Motor-Tensioning Rail Sets SPS, with Movable Attachment Clamps  (4)

Small Geared Motors 12 V, 24 V and 230 V, up to 10 Nm  (175)

• Small Geared Motors CRO, Version A, 230 V, up to 0,5 Nm
• Small Geared Motors CRO, Version B, 230 V, up to 2 Nm
• Small Geared Motors GE/I, up to 2.4 Nm
• Helical small geared motor SF with DC motor, 24 V, up to 2 Nm
• Small Worm Geared DC-Motors SFS Size 2, 12 V and 24 V, up to 5 Nm
• Small Worm Geared DC-Motors SFS Size 3, 12 V and 24 V, up to 10 Nm
• Small Worm Geared Motors SG 24V, Output Side 1
• Small Worm Geared Motors SG 24V, Output Side 2
• Small Worm Geared Motors SG 24V, Output Hollow Shaft
• Planetary Small Geared Motor SFP with DC Motor, Size 1
• Toon alle

Helical Geared Motors NR/I, 230/400 V, up to 1.5 kW, up to 650 Nm  (105)

Linear Actuators Drives GR/I  (26)

• Linear Actuators GR/I
• Hand Operators GR/I
• Cable with plug for Linear Actuators GR/I
• Control Boxes GR/I Version 2019

Linear Actuators MM (Lifting Devices)  (15)

• Linear Actuators MM 115, Outside-Ø 115 mm, 3x 400V AC
• Linear Actuators MM 128, Outside-Ø 128 mm, 3x 400V AC

Shaft-Mounted Flat Gearboxes BOC1, 2-Stage  (104)

• Shaft-Mounted Flat Gearboxes BOC1, 2-Stage, Size 1, Version A, up to 250 N
• Shaft-Mounted Flat Gearboxes BOC1, 2-Stage, Size 2, Version A, up to 400 N
• Shaft-Mounted Flat Gearboxes BOC1, 2-Stage, Size 3, Version A, up to 900 N

Planetary Gear MPS/MPL  (129)

• Planetary Gear MPS
• Planetary Gear MPL

Worm Gear Units, up to 878 Nm  (296)

• Worm Gear Units KES 15, up to 3 Nm, i=12:1 bis 47:1
• Worm Gear Units KES 20, up to 15 Nm, i=13:1 up to 65:1
• Worm Gear Units KES 30, up to 20 Nm, i=5:1 bis 64:1
• Worm Gear Units Type G/II, up to 12 Nm, a=31mm
• Worm Gear Units Type G/II, up to 14 Nm, a=33mm
• Worm Gear Units H/I, up to 226 Nm, i=7,5:1 up to 100:1
• Push-In Type Output Shafts for H/I, Single Sided
• Push-In Type Output Shafts for H/I, Double Sided
• Worm Gear Units ZM/I Size 40, up to 107 Nm
• Worm Gear Units ZM/I Size 50, up to 215 Nm
• Toon alle

Motor Controllers MAE for DC-Drives  (2)

Worm Gear Screw Jacks NPK, with Ball Screw  (20)

• Worm Gear Screw Jacks NPK, with Ball Screw, Version A: Standard version
• Worm Gear Screw Jacks NPK, with Ball Screw, Version B: with anti-rotation guide
• Worm Gear Screw Jacks NPK, with Ball Screw, Version C: Travelling nut version
• Travelling Nut for NPK Version C, with Ball Thread

Motor controller SFRG 3 for Brushed DC-Drives  (1)

Operating Capacitors KST  (6)

Motorbases RMW  (2)

Helical Geared Motors HR/I 230/400 V, up to 1.5 kW, up to 603 Nm  (160)

• Helical Geared Motors HR/I
• Output Flanges for Helical Geared Motors HR/I, Size 20 and 30
• Output Flanges for Helical Geared Motors HR/I, Size 40
• Output Flanges for Helical Geared Motors HR/I, Size 50 and 60

Worm Geared Motors 230/400 V, up to 351 Nm  (505)

• Worm Geared Motors MEK, up to 13 Nm, 14 to 280 rpm
• Worm Geared Motors MEG, up to 17 Nm, 19 to 560 rpm
• Worm Geared Motors MH , up to 17 Nm, 19 to 560 rpm
• Helical Worm Geared Motors SRM, up to 25 Nm, 2.8 to 224 rpm
• Worm Geared Motors R, up to 32 Nm, 18 to 207 rpm
• Worm Geared Motors RH, up to 32 NM, 18 to 207 rpm
• Helical Worm Geared Motors SRS, up to 50 Nm, 2.4 to 190 rpm
• Worm Geared Motors MZ, up to 7.8 Nm, 0.9 to 224 rpm
• Worm Geared Motors RL, up to 7.8 Nm, 0.9 to 224 rpm
• Worm Geared Motors RM, up to 36 Nm, 0.6 to 56 rpm
• Toon alle

Linear Drives (lifting devices) SFL, 12 V - 24 V, up to 2.100 N  (10)

• Linear Drives (lifting devices) SFL 12 V - 24 V
• Linear Drives (lifting devices) SFL 12 V - 24 V, with Hall-IC
• Spindles for linear drives (lifting devices) SFL