Boards with Square Pads and Foil Laminate Holes. The foil laminate allows wires to be placed in the same holes as the tails of the components, enabling very secure soldered connections to be made. ...
Boards with Square Pads and Foil Laminate Holes. The foil laminate allows wires to be placed in the same holes as the tails of the components, enabling very secure soldered connections to be made. ...
Square Pad PCB. Recommended for wire-wrapping applications Epoxy glass - CEM 30 1.6mm thick, copper-clad Single sided Hole pitch 2.54mm (0.1in) Hole dia 1.0mm
Double-Sided Microboards PTH. The component side of the card features a colander ground plane which assists glitch free high speed operation by dissipating switching spikes. This ground plane is so...
Square Pad PCB. Recommended for wire-wrapping applications Epoxy glass - CEM 30 1.6mm thick, copper-clad Single sided Hole pitch 2.54mm (0.1in) Hole dia 1.0mm
KM6 Veroboard® boards for DIN 41612 connectors. Single-sided boards combining the advantages of Veroboard, the flexibility of Eurocards and DIN 41612 connectors. For wiring by wrapping applications...
Eurocards: Lined on each side with through-hole. Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth scr...
Square pad cards. Single-sided boards for wiring by wrapping, with optimum flexibility and maximum density. The DIP sockets are held in place by soldering the outer pins to the corresponding square...
Square Pad PCB. Recommended for wire-wrapping applications Epoxy glass - CEM 30 1.6mm thick, copper-clad Single sided Hole pitch 2.54mm (0.1in) Hole dia 1.0mm
Copper-tin plated square pad cards. Single-sided copper-tin plated square pad cards. 2.54 mm drilled pitch. Gap between tracks is 0.54 mm. Square pads 2 mm x 2 mm.
Eurocards: Lined on each side with through-hole. Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth scr...
Veroboard® Boards and Plug-in DIPs. A range of boards that is just as easy to use as the standard Veroboard, but which have a direct connector to provide a secure interface.
Square Pad PCB. Recommended for wire-wrapping applications Epoxy glass - CEM 30 1.6mm thick, copper-clad Single sided Hole pitch 2.54mm (0.1in) Hole dia 1.0mm
Cif Athelec Matrix BoardThe Cif Athelec matrix board is 100mm long and 580mm wide. It is a single-sided board with 1mm holes and 2.54mm pitch.Features and Benefits• 15/10th tinned copper clad pads ...