Copper-tin plated square pad cards. Single-sided copper-tin plated square pad cards. 2.54 mm drilled pitch. Gap between tracks is 0.54 mm. Square pads 2 mm x 2 mm.
Tinned Copper Test Card. This Test Card from CIF is drilled at a 2.54 mm pitch with a drilling diameter of 1 mm. 2 mm wide tracks cover the entire product surface which is produced from FR4 epoxy g...
The CIF Tinned Copper Clad Strips,16/10mm has 160 x 200 mm format.Drilled at a pitch of 2.54 mm Ø -> drilling 1 mm Interval between tracks 0.54 mm Track width 2 mm over the entire surface Material:...
Boards with Square Pads and Foil Laminate Holes. The foil laminate allows wires to be placed in the same holes as the tails of the components, enabling very secure soldered connections to be made. ...
Eurocards: Lined on each side with through-hole. Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth scr...
Boards with Square Pads and Foil Laminate Holes. The foil laminate allows wires to be placed in the same holes as the tails of the components, enabling very secure soldered connections to be made. ...
Veroboard® Boards and Plug-in DIPs. A range of boards that is just as easy to use as the standard Veroboard, but which have a direct connector to provide a secure interface.
Number of Sides = 1 Hole Pitch = 2.54 x 2.54mm Dimensions = 160 x 100mm Length = 160mm Width = 100mm Base Material = Synthetic Resin Bonded Paper Hole Diameter = 1.02mm FR Material Grade = FR2 Hole...
KM6 Veroboard® boards for DIN 41612 connectors. Single-sided boards combining the advantages of Veroboard, the flexibility of Eurocards and DIN 41612 connectors. For wiring by wrapping applications...
KM6 Veroboard® boards for DIN 41612 connectors. Single-sided boards combining the advantages of Veroboard, the flexibility of Eurocards and DIN 41612 connectors. For wiring by wrapping applications...