Copper-tin plated square pad cards. Single-sided copper-tin plated square pad cards. 2.54 mm drilled pitch. Gap between tracks is 0.54 mm. Square pads 2 mm x 2 mm.
Tinned Copper Test Card. This Test Card from CIF is drilled at a 2.54 mm pitch with a drilling diameter of 1 mm. 2 mm wide tracks cover the entire product surface which is produced from FR4 epoxy g...
The CIF Tinned Copper Clad Strips,16/10mm has 160 x 200 mm format.Drilled at a pitch of 2.54 mm Ø -> drilling 1 mm Interval between tracks 0.54 mm Track width 2 mm over the entire surface Material:...
Prototype Board, standard, 2 mm grid, RE130. 35 μm CU on one side HAL hot dip tin-plated Hole pattern: 2 x 2 mm (0.79mil) Soldering islands 1.6 mm² 44 x 42 holes in rows Hole diameter: 0.8 mm Solde...
Boards with Square Pads and Foil Laminate Holes. The foil laminate allows wires to be placed in the same holes as the tails of the components, enabling very secure soldered connections to be made. ...
Eurocards: Lined on each side with through-hole. Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth scr...
Boards with Square Pads and Foil Laminate Holes. The foil laminate allows wires to be placed in the same holes as the tails of the components, enabling very secure soldered connections to be made. ...