DIN Rail Terminal Blocks (4.387 artikelen)

Not all types may be available. Triple Deck and Sensor. For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the rema...

Not all types may be available. Triple Deck and Sensor. For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the rema...

Colour = Grey Number of Levels = Single Series = SNA Termination Method = Bolt Cable CSA = 25mm² Voltage Rating = 1 kV ac Pitch = 26mm Minimum Operating Temperature = -5°C Maximum Operating Tempera...

UL listed, SETI, GL, FIMKO. Double Deck. ABB series of double deck DIN Rail terminals with four independent screw clamp connections and are suitable for use with a wide range of cable size. Feature...

Isolating Feedthrough (Double Deck). A double-deck terminal with knife action isolation and feed through termination. Fused Circuit and Test Terminals

UL listed,CSA certified,ASE,SETI,SEMKO,NEMKO,DEMKO,GL,FIMKO,VDE,CEGB,KEMA,E ExiI/II,E Exei/II. Terminals of 70mm² and larger incorporate a hexagon key actuated rising clamp system. Terminal sizes u...

BS 6273:1982, EN 50 045, DIN 46277-2. 4mm ;sup>2 ;/sup> Miniature Terminals. A miniature range of screw terminals designed for mounting onto symmetric rail. The terminals are moulded in tough flame...

End cover stock no. ; 424-866 424-866 may be used with this terminal. Thermocouple Cable Accepting. Accepts any type of thermocouple from 0.9mm to 1.5mm diameter without forming a `cold ‘ junction ...

2 in, 1 out. Further circuits may be commoned using ‘pre-assembled ‘ or ‘alternative ‘ jumper bars.

; 627-3456 627-3456 is UL Listed and has SETI approval. Isolating Terminal. For circuit interruption during testing or maintenance routines.

UL listed, CSA certified. 2 In, 2 Out. The terminal enabling four common connection points. Further circuits may be commoned using pre assembled jumper bars.

Spring Loaded Terminal (Feedthrough and Test). Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50...

UL listed,CSA certified,ASE,SETI,SEMKO,NEMKO,DEMKO,GL,FIMKO,VDE,CEGB,KEMA,E ExiI/II,E Exei/II. Terminals of 70mm² and larger incorporate a hexagon key actuated rising clamp system. Terminal sizes u...

; 627-3456 627-3456 is UL Listed and has SETI approval. Isolating Terminal. For circuit interruption during testing or maintenance routines.

High Current Double Stud Terminals and Shrouds. A set of 4 spacers is available and should be fitted between each terminal to provide additional isolation. A translucent cover which snaps onto the ...