Connecting Components (46 artikelen)

Multi-Block. Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A s...

Multi-Block. Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A s...

Multi-Block. Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A s...

Straight Connecting Strip XC and XD. For connecting beam ends to end.,Suitable for moment loads but for pulling loads use a yoke,Stock-no. 261-2166 (4 hole) and stock-no. 308-0217 (2 hole) include ...

Fixings Included. Corner Fittings XD and XC, 45° and 90°. For building stable and neat framework corners.The beams must be cut accurately (45° for a 90°corner, and 22.5° for a 45° corner).Corner fi...

Fixings Included. Corner Fittings XD and XC, 45° and 90°. For building stable and neat framework corners.The beams must be cut accurately (45° for a 90°corner, and 22.5° for a 45° corner).Corner fi...

Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.

T-slot Connector XC. Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of th...

Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.

T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nut...

Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.

Straight Connecting Strip XC and XD. For connecting beam ends to end.,Suitable for moment loads but for pulling loads use a yoke,Stock-no. 261-2166 (4 hole) and stock-no. 308-0217 (2 hole) include ...

Straight Connecting Strip XC and XD. For connecting beam ends to end.,Suitable for moment loads but for pulling loads use a yoke,Stock-no. 261-2166 (4 hole) and stock-no. 308-0217 (2 hole) include ...

T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nut...

Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.