 | | | | |
Afbeelding | | | | Bestellen |
|
|
|
Festo VAMC Mounting Kit (4 zoekresultaten) The Festos cover cap is used PA-reinforced material for cover.Product weight 0.32 g |
|
vanaf € 2,62*
per stuk |
|
|
Festo VAMC Mounting Kit (3 zoekresultaten) The Festos push-in Y-connector has standard size, nominal size 3.5mm which used has push/pull principle of design structure with operating pressure complete temperature range up to -0.95 - 16bar.Am... |
|
vanaf € 5,57*
per stuk |
|
|
Festo VAMC Mounting Kit (4 zoekresultaten) The Festos push-in Y-connector has standard size, nominal size 5.5mm which used has push/pull principle of design structure with operating pressure complete temperature range up to -0.95 - 16bar.Am... |
|
vanaf € 6,47*
per stuk |
|
|
Festo VAMC Mounting Kit (3 zoekresultaten) The Festos push-in Y-connector has standard size, nominal size 9.5mm which used has push/pull principle of design structure with operating pressure complete temperature range up to -0.95 - 16bar.Am... |
|
vanaf € 2,43*
per stuk |
|
|
Festo VAMC Mounting Kit (5 zoekresultaten) The Festos activated carbon filter cartridge used for series D, virtually oil-free compressed air which size is 12.Product weight 445 g |
|
vanaf € 6,46*
per stuk |
|
|
Festo VAMC Seal (1 zoekresultaat) Accessory Type = Seal Manufacturer Series = VAMC |
|
vanaf € 1,453*
per stuk |
|
|
Festo VAMC Seal (1 zoekresultaat) Accessory Type = Seal Manufacturer Series = VAMC |
|
vanaf € 1,463*
per stuk |
|
|
Festo VAME Bracket (3 zoekresultaten) The Festo VAME series valve mounting element is a 2 pieces for fitting the valve manifold assembly on an H-rail. It has a maximum tightening torque of 3 Nm.RoHS compliant Product weight - 12 g |
|
vanaf € 7,27*
per stuk |
|
|
Festo VAME Bracket (4 zoekresultaten) The Festo VAME series valve mounting element is a 2 pieces for fitting the valve manifold assembly on an H-rail. It has a maximum tightening torque of 1.4 Nm.RoHS compliant Product weight - 10 g |
|
vanaf € 7,15*
per stuk |
|
|
|
|
vanaf € 6,888*
per stuk |
|
|
Festo VAME Mounting Kit (4 zoekresultaten) The Festo VAME series foot mounting bracket is a made of steel galvanised material. It has a maximum tightening torque of 0.6 Nm.RoHS compliant Product weight - 130 g |
|
vanaf € 16,37*
per stuk |
|
|
Festo VAME Mounting Kit (4 zoekresultaten) The Festo VAME series H-rail mounting is a 2 pieces for fitting the valve manifold assembly on an H-rail. It is made of steel material.CRC type - 2 (moderate corrosion stress) RoHS compliant |
|
vanaf € 5,53*
per stuk |
|
|
Festo VAME Mounting Kit (4 zoekresultaten) The Festo VAME series h-rail mounting is suitable for VPPM proportional-pressure regulator. It is made of wrought aluminium alloy material.CRC type - 1 (low corrosion stress) Product weight - 150 g |
|
vanaf € 33,12*
per stuk |
|
|
Festo VAME Mounting Kit (3 zoekresultaten) The Festos cover cap is used after fitting the covering cap with manual override then only non-latching. It used PA-reinforced material for cover.Product weight 3 g |
|
vanaf € 11,15*
per stuk |
|
|
Festo VAME Mounting Kit (4 zoekresultaten) The Festos cover cap used PA-reinforced material for cover.0 - No corrosion stress |
|
vanaf € 7,51*
per stuk |
|
|
