Sensor Accessories (16 artikelen)

The ATMI FIX-CAB cable tie which is an inexpensive and often overlooked accessory in installations. It is strongly recommended for the fixing of all suspended devices in order to avoid the deterior...

The ATMI LESTS 175g counterweight which is loaded resin ballast for float and tilt level switches. The adjustable ballasts is to define the pivot point of the float level switch. A ballast is parti...

The ATMI LESTS 275g counterweight which is clip ballast for float and tilt level switches. The adjustable ballasts is to define the pivot point of the float level switch. A ballast is particularly ...

The ATMI LESTS 200g counterweight which is plastic ballast for float and tilt level switches. The adjustable ballasts is to define the pivot point of the float level switch. A ballast is particular...

The ATMI PRISE ASTP alarm plug for all float level switches. The overflow alarm socket connected to float allows to alarm an overflow level or lack of water with integrated sound siren.ABS housing ...

Two mounting screws (M3 x 12 mm sems screws) are supplied The through-beam model requires two mounting brackets, one each for the projector and the receiver. Cannot be used for the connector models.

Accessory Type = Reflector For Use With = SA1E-NP, SA1E-PP

Accessory Type = Reflector For Use With = SA1E-NP, SA1E-PP

Accessory Type = Reflector For Use With = SA1E-NP, SA1E-PP

Accessory Type = Reflector For Use With = SA1E-NP, SA1E-PP

Accessory Type = Mounting Block Series = SA9Z

Accessory Type = Mounting Bracket Series = SA9Z

Accessory Type = Small Reflector For Use With = SA1E-T

Two mounting screws (M3 x 12 mm sems screws) are supplied The through-beam model requires two mounting brackets, one each for the projector and the receiver.

The through-beam model requires two mounting brackets, one each for the projector and the receiver