Motor Controllers (54 artikelen)

G320 Series. Professional range of G320 Digital Servo Drives. This product is reliable and been known as a workhorse because of its ability to be used in any application in any environment. All mod...

G901X - Step Pulse Multiplier. The G901X is a step pulse multiplier for G201X (Stock-no. 793-4127) and G203V (Stock-no. 793-4121) Digital Stepper Drives. Allows base drive to run in full step, half...

G250X - Step Motor Drive. The G250 is a high-quality step motor drive, build on a circuit board with 2x15 2.54mm header for the connection. Stepper Motor Drive Input frequency till 250kHz Temperatu...

G250X - Step Motor Drive. The G250 is a high-quality step motor drive, build on a circuit board with 2x15 2.54mm header for the connection. Stepper Motor Drive Input frequency till 250kHz Temperatu...

The 4-axix drive contains the G250 stepper drive boards, stock no. ; 896-8553 896-8553. G540 - Step Motor Drive 4-Axis. The G540 is a complete 4-axis system which plugs directly into a computer via...

GM215 - Multi-mode Step Motor Controller. The GM215 is a stepper drive with a full motion controller. 15 operating modes include Motion Control, stand-alone control and sub-micro stepping for the s...

G214 Series. Professional range of G214 stepper drives. The G214 step motor drive is a powerful yet cost effective FPGA which is designed for high-power applications. The step motor drive was made ...

G203V - Stepper Drive. The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature...

G201X - Step Motor Drive. The G201X is a stepper motor drive with an aluminium case. Drives stepper motors up to 7 Amps. STEP and DIRECTION inputs are +3.3/5 VDC compatible Recirculate mode during ...

The Sprint Electric 3600XRi series have 4 quadrant regenerative controller for permanent magnet or shunt wound motors up to 0.55KW isolated 4Q up to 4A output and it have 1phase 110 – 240VAC input,...

The Sprint Electric 3600XRi series have 4 quadrant regenerative controller for permanent magnet or shunt wound motors up to 1.1KW isolated 4Q up to 8A output and it have 1phase 110 – 240VAC input, ...

The Sprint Electric 3200i series is DC motor controller for permanent magnet or shunt wound motors up to 11KW isolated 1Q up to 48A output and 2 phase 240 – 415V input, up to 320VDC output voltage....

Phase = 3 Control Function = Speed Controller Supply Voltage = 200 → 240/380 → 480 V Current Rating = 34 A Voltage Rating = 480 V Power Rating = 14 kW

The Sprint Electric 3600XRi series have 4 quadrant regenerative controller for permanent magnet or shunt wound motors up to 2.2KW isolated 4Q up to 16A output and it have 1phase 110 – 240VAC input,...

The Sprint Electric 3200i series is DC motor controller for permanent magnet or shunt wound motors up to 2.2KW isolated 1Q up to 8A output and 2 phase 240 – 415V input, up to 320VDC output voltage....