Vega VEGASWING 51 Series Tuning Fork Level Probe, PNP Output, Horizontal, Stainless Steel Body

Vega Vibrating Level SwitchThe Vega universal vibrating level switch for liquids has PNP transistor output. This is independent of the mounting position, it detects the limit level reliably with millimetre accuracy. This can be used as an empty or full detector, as approved overfill protection, dry running protection or pump protection in vessels and pipelines. It is an affordable solution with maximum reliability and safety. Note: This is the manufacturers referral for the VEGASWING 71AVibrating Liquid/Solid Level Probes – Squings All of these probes are maintenance-free and have an external LED switch status indicationFeatures and BenefitsThe supply voltage ranging from 10VDC to 55VDC Process fitting for thread is G A, G1 A, NPT or 1 NPT and hygienic fittings is Tri-Clamp 1″, Tri-Clamp 1″, bolting DN 25 PN 40, bolting DN 40 PN 40, SMS Precise and reliable function due to product-independent switching point Minimum time and cost expenditure simple setup without a medium High chemical resistance 316L stainless steel housing and switch point of 104mm High repeatability switching Unaffected by product density, conductivity, dielectric constant or viscosity (up to 10,000 mPa) Process fitting / Material: Thread G1 PN64, DIN3852-A/316L Maximum power consumption is 0.5W Electronics: Transistor PNP 9.6VDC to 35VDC Electrical connection/Protection Switching point: with extended switching point Operating temperature ranges between -40°C and 150°CApplicationsSmall level switch version with stainless steel housing Point level detection for bilge and leakage monitoring Oil tank point level detection in the rotor gearboxCertificationsIP67 rated (Valve plug termination) IP65 rated (Valve plug) CE certified