| | | | | | | Afbeelding | | | | Bestellen | | |
Proxxon 24 108 kolomboormachine 140 W (1 zoekresultaat) The headstock swivels through 360°, indicated on a scale. Height is adjusted via a zero adjustable handwheel, also used as fine feed when milling (one revolution equals 1mm travel). The quill and h... |
|
vanaf € 748,65* per stuk |
| |
Proxxon 28 492 Zonder sleutel 550 g (3 zoekresultaten) With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head. Also suitable for right-angled separation of rods. With a special balanced, powerful, quiet and lo... |
|
vanaf € 77,08* per stuk |
| |
Proxxon TBM 220 kolomboormachine 85 W (3 zoekresultaten) Machined worktop of high quality, ribbed die-cast aluminium (220 x 120mm). Adjustable fence with scale. Solid, hard-chromed steel column, 340mm high, 20mm diameter. Super stable die-cast head with ... |
|
vanaf € 124,39* per stuk |
| |
|
|
vanaf € 52,66* per stuk |
| |
|
|
vanaf € 6,41* per stuk |
| |
|
|
vanaf € 14,21* per stuk |
| |
Proxxon 28690 schroefboormachine & slagmoersleutel (3 zoekresultaten) With pre-selectable torques of 0.26 - 1.48 lbs ft (0.35 - 2.0Nm). Small, light and easy to handle. An ideally positioned rocker switch provides on/ off/reverse. A RÖHM chuck facilitates acceptance ... |
|
vanaf € 65,47* per stuk |
| |
Proxxon 28124 boor 4500 RPM 10 kg (1 zoekresultaat) Practical height adjustment via toothed rack with easy to operate crank. Powerful, long-lasting direct current motor. Spindle drive via triple belt pulley with the advantage of roughly 6 times the ... |
|
vanaf € 379,01* per stuk |
| |
|
|
vanaf € 127,38* per stuk |
| |
Proxxon 28132 montagekit (4 zoekresultaten) Die-cast zinc. With three machined sides. The slot fits the adjustable fence of the drill stand MB 140/S and bench drill TBM 220. Horizontal and vertical V-slots in jaw. Jaw width 50mm and height 1... |
|
vanaf € 13,46* per stuk |
| |
|
|
vanaf € 12,84* per stuk |
| |
Proxxon 29 810 (3 zoekresultaten) For grinding of small openings, finishing of moulds, surfaces, radii, grooving, deburring and chamfering of precision parts. With variable electronic speed control. The head rotates through 60° at ... |
|
vanaf € 127,43* per stuk |
| |
Proxxon 29 800 700 g (3 zoekresultaten) For drilling, milling, grinding, polishing, cleaning, cutting, engraving and signing. High-revving with variable electronic speed control for high torque, even in the lower speed range. Double-row ... |
|
vanaf € 110,56* per stuk |
| |
|
|
vanaf € 89,90* per stuk |
| |
|
|
vanaf € 47,02* per stuk |
| |
|