Aansluitklem  (403 artikelen gevonden)

ABB 1SNK900619R0000

Current Rating quoted is rated short-time withstand current. Earth Terminals. Snap-in rapid installation and removal for 4 to 16mm² Screw rail connection for higher rated 35 to 95mm² Available in 4...

Test Plugs. Quick plug-in mounting system Sold in packs of 10

Jumper Bars. For use with SNK terminal blocks Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch Pre-cut poles

Terminal Partitions ; Protective Covers. The partition fits the end of a terminal and doubles as an end cover and insulating barrier by extending above it. The translucent protective cover snap-fit...

Feed-through Terminal Blocks. Available in 4mm ;sup>2 ;/sup> to 95mm ;sup>2 ;/sup> sizes 4mm, 6mm and 10mm sold in packs of 10 16mm and 35mm sold in packs of 5 70mm and 95mm sold individually

Surge Protected Terminal Block. Grey nylon polyamide 6.6 moulding Captive terminal screws with hardened heads Compact 9mm spacing size Deep Top Hat or G type rail mounting Location category Zone 2 ...

Jumper Bars. For use with SNK terminal blocks Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch Pre-cut poles

UL listed, CSA certified. The fuseholder limits the rating to 250V/16A irrespective of markings on the terminals. Fused Terminals. Two versions of fused terminals The latched, pull up fuse terminal...

Current Rating quoted is rated short-time withstand current. Earth Terminals. Snap-in rapid installation and removal for 4 to 16mm² Screw rail connection for higher rated 35 to 95mm² Available in 4...

Accessory Type = Marker Card For Use With = Terminal Block Series = MC512PA

Jumper Bars. For use with SNK terminal blocks Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch Pre-cut poles

; 627-3456 627-3456 is UL Listed and has SETI approval. Isolating Terminal. For circuit interruption during testing or maintenance routines.

Ground ; Neutral Bars. A simple easy to use system of DIN 3 rail mounting ground and neutral bars for panel or box assemblies, colour coded in green (ground) and blue (neutral) to ease identificati...

Terminal Markers. For standard range of DIN rail terminals. Supplied as cards of 100 and marked 1 to 100 or blank, in 5mm or 6mm pitch. 5mm markers are suitable for consecutively marking terminals ...