MIL 13949 F for FR4. Single-Sided Raw Epoxy FR4 Base. This single-sided raw epoxy base is produced from eight glass tissue layers for exceptional quality.
MIL 13949 F for FR4. Single-Sided Raw Epoxy FR4 Base. This single-sided raw epoxy base is produced from eight glass tissue layers for exceptional quality.
MIL 13949 F for FR4. Double-Sided Raw Epoxy FR4 Base. This double-sided raw epoxy base is produced from eight glass tissue layers for exceptional quality.
MIL 13949 F for FR4. Double-Sided Raw Epoxy FR4 Base. This double-sided raw epoxy base is produced from eight glass tissue layers for exceptional quality.
Board is not photoresist. CIF Copper Clad Epoxy Boards. High-quality layered untreated copper-plated boards. Eight layers of glass cloth. Graving or touch-up pens are available separately. Product ...
Microtrak FR4 epoxy glass laminates are dip coated with a high resolution positive working Photoresist. The Photoresist contains a dye which gives a good contrast against the copper, allowing board...
Microtrak FR4 epoxy glass laminates are dip coated with a high resolution positive working Photoresist. The Photoresist contains a dye which gives a good contrast against the copper, allowing board...
The CIF Copper resist board 1 side,16/10mm, 35 um has 75 x 100 mm format. It has High quality laminate ,8 layers of glass fabric and MIL 13949 F standard.UL94V0 flammability class Moisture absorpti...
UL, CSA (K130 and above). Developer concentration: use sachet 160-9490 or 6-10g/l of Sodium or Potassium Hydroxide. Conduct trials if in doubt. Pre-Sensitised Boards 35μm or 70μm. Complies with mil...
The CIF photosensitive plates are coated with a hard and highly adherent blue resin with a thickness of 4.5 μm. This dust-free resin allows a resolution of the order of 2.5 microns. Sensitivity to ...
Board is not photoresist. CIF Copper Clad Epoxy Boards. High-quality layered untreated copper-plated boards. Eight layers of glass cloth. Graving or touch-up pens are available separately. Product ...
UL, CSA (K130 and above). Developer concentration: use sachet 160-9490 or 6-10g/l of Sodium or Potassium Hydroxide. Conduct trials if in doubt. Pre-Sensitised Boards 35μm or 70μm. Complies with mil...
UL, CSA (K130 and above). Developer concentration: use sachet 160-9490 or 6-10g/l of Sodium or Potassium Hydroxide. Conduct trials if in doubt. FR4 Pre-Sensitised Boards. Complies with the military...
UL, CSA (K130 and above). Developer concentration: use sachet 160-9490 or 6-10g/l of Sodium or Potassium Hydroxide. Conduct trials if in doubt. FR4 Pre-Sensitised Boards. Complies with the military...
UL, CSA (K130 and above). Developer concentration: use sachet 160-9490 or 6-10g/l of Sodium or Potassium Hydroxide. Conduct trials if in doubt. Pre-Sensitised Boards 35μm or 70μm. Complies with mil...