Extender Boards & Adapter Boards (27 artikelen)

Extensions with metal holes. This range of PTH extension boards is available in two combinations: standard and super. The standard 64 // 64 range is assembled with a DIN connector (front and back),...

Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels). 64-Way Standard Extender...

Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels). 64-Way Standard Extender...

Type = DIP adapter evaluation module Number of Sides = 1

Type = Conversion Board Base Material = Epoxy Glass Fabric Laminate Number of Sides = 2 Dimensions = 38.36 x 22.86 x 0.8mm FR Material Grade = FR4 Length = 38.36mm Thickness = 0.8mm Width = 22.86mm...

Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 22.86 x 22.86 x 1.0mm FR Material Grade = CEM3 Length = 22.86mm Thickness = 1mm Width = 22.86mm

Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 27.94 x 17.78 x 1.6mm FR Material Grade = CEM3 Length = 27.94mm Thickness = 1.6mm Width = 17.78mm

Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 25.4 x 24.13 x 1.6mm FR Material Grade = CEM3 Length = 25.4mm Thickness = 1.6mm Width = 24.13mm

Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 30.48 x 24.13 x 1.6mm FR Material Grade = CEM3 Length = 30.48mm Thickness = 1.6mm Width = 24.13mm

Micro-USB Micro-AB connector is converted to 2.54mm pitch. The connector is already mounted.A pin header is included for convenient connection to the main board. There is approximately 5mm from the...

USB connector conversion board CK-36FeaturesA pin header is included for convenient connection to the main board. There is approximately 5mm from the rear end of the connector to the take-out land,...

Siemens 6NH3112-3BA00-6XX1

Type = Extender board Connection = DIN 41612 Number of Contacts = 96 Base Material = Epoxy Glass Fabric Laminate Number of Sides = 2 Dimensions = 281.6 x 233.4 x 1.6mm Copper Thickness = 35µm FR Ma...

Adapter SOT353 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SOT353 with 0.65 mm p...

Adapter SSOP8 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SSOP8 with 0.65 mm pit...