Motor Controllers (350 artikelen)

Phase = 3 Control Function = Current Controller Supply Voltage = 24 V Current Rating = 63 A Voltage Rating = 600 V

Current Rating = 63 A

A 6 vdc or 12 vdc power supply is required for operation (not included). Linear Actuator Control Board. The LAC board from Actuonix is a standalone closed loop control board specially designed for ...

ST5-Q and ST10-Q - Stepper Drives. ST5-Q and ST10-Q - High Performance Stepper Motor Drives with multiple control options. Stepper Motor Drives ST-Q Advanced Current Control Anti-Resonance Torque R...

ST5-Q and ST10-Q - Stepper Drives. ST5-Q and ST10-Q - High Performance Stepper Motor Drives with multiple control options. Stepper Motor Drives ST-Q Advanced Current Control Anti-Resonance Torque R...

STR - Stepper Drive. STR - High Performance Stepper Drive. Easy Drive Configuration, on-board DIP switches are used to configure running current, idle current, load inertia ratio and step resolutio...

ST5-S and ST10-S Stepper Drive. ST5-S and ST10-S step drives offer the following features:. Pulse and direction CW/CCW pulse A/B quadrature Analogue velocity (oscillator) mode Host commands (SCL co...

ST5-Si and ST10-Si Programmable Stepper Drive. ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included) Microstepping 200 ...

ST5-S and ST10-S Stepper Drive. ST5-S and ST10-S step drives offer the following features:. Pulse and direction CW/CCW pulse A/B quadrature Analogue velocity (oscillator) mode Host commands (SCL co...

STG-125 Engine Controller. The STG-125 is a highly innovative diesel engine controller that comes with outstanding monitoring functions that are suitable for all KUBOTA® diesel engines. The control...

Phase = 1 Control Function = PWM, Speed Controller Supply Voltage = 12 → 48 V Current Rating = 100 A Voltage Rating = 60 V Power Rating = 1.5 kW Overall Length = 180mm Overall Width = 122mm

EM-24xA DC-Motor Controller. The EM-241A/ EM-243A are full bridge DC-motor starters. It is designed to work with DC-motor in applications where some special functions are needed. Starter has adjust...

Small size High current output Current limit Zero current limit Overvoltage brake Speed setting Flexible control inputs Impulse / continuous mode Rail base mountable Digital parameter setting 48V v...

EM-285 DC-Motor Speed Regulator. EM-285 is a PWM-based DC-motor driver. The materials and features meet the industrial standards. Motor voltage is regulated against supply voltage changes, and ther...

Small size High current output 2ch pulse counter inputs Pulse counter limits. Current limit Zero current limit Overvoltage brake Speed setting PWM 2 or 16 kHz Flexible control inputs Impulse / cont...

Analog feedback 5V, 10V or 4-20mA control Position accuracy max. 0,1% Solid state power stage Small size, great performance Digitally settable parameters Verstile dynamic settings Housing options a...

Quadrature pulse counting Multiple dynamic settings Solid state power stage One or two pulse feedback Voltage or mA control Position accuracy max. 0.2% Versatile setting options Digitally settable ...

Smal lsize High current output Current limit Zero current limit Over voltage brake Speed setting Flexible control in puts impulse/continuous mode Rail base mountable 2KHzor16kHzpwmfrequency For mot...

Analog feedback Multiple dynamic settings Solid state power stage One or two pulse feedback Voltage or mA control Position accuracy max. 0.2% Versatile setting options digitally settable parameters...

Quadrature pulse counting Multiple dynamic settings Solid state power stage One or two pulse feedback Voltage or mA control Position accuracy max. 0.2% Versatile setting options Digitally settable ...

Three phase output Speed and torgue adjustment Open/closed loop modes Regenerative braking option True 4Q-power stage Braking resistor output Current limit and trip Symmetrical control option ±5V o...

EM-269A is brushless DC-motor driver for motors with hall sensor feedback. The unit has a mosfet power stage with good efficiency and it meets also todays EMC requirements. The unit has the basic d...

EM-291A is brushless DC-motor driver for motors with hall sensor feedback. The unit has a mosfet power stage with good efficiency and it meets also todays EMC requirements. The unit has the basic d...

To the motors with HALL sensors Three phase output Speed and torgue adjustment Open/closed loop modes Dynamic braking Control output for cooling fan. True 4Q-power stage Braking resistor output Sel...

EM-185 DC Motor Speed Regulator. The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested...

EM-175 DC-Motor Controller. EM-175 motor driver is designed for DC-motor speed control. The unit regulates motor voltage so non regulated supply voltage is well suited. A load affecting the motor r...

On/Off/Direction Change. The drive is developed for controlled ON-OFF driving and direction change of a DC-brushed motors. The drive has advanced current limit features. It limits the motor current...

PWM DC 8A 12-32Vdc. EM-174 motor drive is designed for DC-motor speed control. The unit regulates motor voltage so a non regulated supply voltage is suitable. Potentiometer or direct voltage signal...

EM-176 DC-Motor Controller. EM-176 is designed for DC-motor speed control. The unit can be used with unregulated DC supply. Motor loading can be compensated with inbuilt RxI-type adjustment. Speed ...

Bibolar chopper 1, 1/2 , 1/4...1/64 steps Four preset function inputs PNP or TTL control Quiet run current control Acceleration / deceleration ramps DIN-rail base mountable

Bibolar chopper 1,1/2,1/4...1/64steps Four preset function inputs PNP or TTL control Quiet run current control Acceleration / deceleration ramps DIN-rai lbase mountable

EM-206 Brushless Motor Controller. EM-206 is a DC-motor controller that is designed for brushless motors with hall sensor feedback. The unit has a mosfet-type high efficiency power stage. The unit ...

EM-243C DC Motor Controller. EM-243C is a full bridge DC-motor starter. It is designed to work with DC-motor in applications where some special functions are needed. Starter has adjustable accelera...

4 Quadrant 24V. The drive is designed for modern automation systems. Control can be performed easily with relay or open collector outputs. Analogue controls work with ±10V voltage. Usable motor can...

Small size High current output Current limit Zero current limit Overvoltage brake Speed setting Flexible control inputs Impulse / continuous mode Rail base mountable Digital parameter setting 48V v...

EM-A3-10K is a control potentiometer for automation applications. This unit has a resistor element of conductive plastic material, which offers a good long term endurance. Recommended for indoor us...

EM-A1 is a small auxiliary PCB. It is designed to change control mode from unipolar to symmetric plus/minus control. This card makes it possible to use various Electromen driver cards with bipolar ...

Series SC 2804 - Speed Controller. Faulhaber speed controller SC2804S is designed for the driving and speed control of BL motors in the mid power range. The speed controller contains electronic com...

Series SC 1801 - Speed Controller. Faulhaber speed controller SC1801S is designed for the driving and speed control of BL motors in the low power range. The speed controller contains electronic com...

Series SC 1801 - Speed Controller. Faulhaber speed controller SC1801S is designed for the driving and speed control of BL motors in the low power range. The speed controller contains electronic com...

Motion Controllers Series MCLM 3002. The MCLM 3002 series motion controllers from Faulhaber are easy to use single axis positioning controllers. They have been designed for the control of Faulhaber...

MCST Series Stepper Motor Motion Controller. Faulhaber MCST3601 is a stepper motor controller that has the capability to drive the full range of PRECIstep stepper motors. The motor controller featu...

G320 Series. Professional range of G320 Digital Servo Drives. This product is reliable and been known as a workhorse because of its ability to be used in any application in any environment. All mod...

G901X - Step Pulse Multiplier. The G901X is a step pulse multiplier for G201X (Stock-no. 793-4127) and G203V (Stock-no. 793-4121) Digital Stepper Drives. Allows base drive to run in full step, half...

G250X - Step Motor Drive. The G250 is a high-quality step motor drive, build on a circuit board with 2x15 2.54mm header for the connection. Stepper Motor Drive Input frequency till 250kHz Temperatu...

G250X - Step Motor Drive. The G250 is a high-quality step motor drive, build on a circuit board with 2x15 2.54mm header for the connection. Stepper Motor Drive Input frequency till 250kHz Temperatu...

The 4-axix drive contains the G250 stepper drive boards, stock no. ; 896-8553 896-8553. G540 - Step Motor Drive 4-Axis. The G540 is a complete 4-axis system which plugs directly into a computer via...

GM215 - Multi-mode Step Motor Controller. The GM215 is a stepper drive with a full motion controller. 15 operating modes include Motion Control, stand-alone control and sub-micro stepping for the s...

G214 Series. Professional range of G214 stepper drives. The G214 step motor drive is a powerful yet cost effective FPGA which is designed for high-power applications. The step motor drive was made ...

G203V - Stepper Drive. The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature...

G201X - Step Motor Drive. The G201X is a stepper motor drive with an aluminium case. Drives stepper motors up to 7 Amps. STEP and DIRECTION inputs are +3.3/5 VDC compatible Recirculate mode during ...

Turn OFF power supply before connecting or disconnecting any wiring. Disconnecting the motor with the power ON will destroy the drive board. User instructions. Stepper motor must have four phases a...

Igus DC Motor ControllerThe Igus DC motor controller has an electric rating of 24V voltage rating and 2.5A current rating. It can be used in simple automations directly on the control without softw...

Travel distances, positions, speeds, operating times - easily defined with the new web-based control system for drylin® E linear systems from igus®.No software or app installation necessary, fast c...

Samotronic 101. Easy to use unipolar stepper drive (4 Phase) Compact size - 55 x 40mm Full step and half step modes Integral internal clock, external LS-TTL frequency can be used Rated at 350mA per...

Phase = 1, 3 Control Function = Configurable Supply Voltage = 12 or 24 V dc Voltage Rating = 250 VAC

Phase = 1, 3 Control Function = Configurable Supply Voltage = 12 or 24 V dc Voltage Rating = 250 VAC

Phase = 1, 3 Control Function = Configurable Supply Voltage = 24 V ac Voltage Rating = 600 VAC

Phase = 1, 3 Control Function = Configurable Supply Voltage = 24 V ac Voltage Rating = 600 VAC

The DEC Module 50/5 (Digital EC Controller) is a 1-quadrant amplifier for controlling EC motors with Hall sensors with a maximum output of 250 watts

They have a wide range of functionalities with digital and analogue inputs and outputs and are configured over the USB interface using the graphic user interface "ESCON Studio" for Windows PCs. ESC...

They have a wide range of functionalities with digital and analogue inputs and outputs and are configured over the USB interface using the graphic user interface "ESCON Studio" for Windows PCs. ESC...

They have a wide range of functionalities with digital and analogue inputs and outputs and are configured over the USB interface using the graphic user interface "ESCON Studio" for Windows PCs. ESC...

DEC 24/2 Digital Brushless Amplifier. The DEC 24/2 digital amplifier is a small 1-quadrant digital controller for the control of brushless EC motors up to 48W. The EC motor being used must be equip...

Suitable for use with motors: stock nos. ; 432-8273 432-8273 , ; 440-442 440-442 , ; 440-464 440-464 , ; 440-470 440-470 , ; 191-8328 191-8328 , ; 191-8362 191-8362 , ; 191-8378 191-8378 , ; 191-83...

Bipolar Stepper Drive. Drives motors up to 85V and 6A/phase On board output drive current setting (2.5 to 6.0A) High efficiency chopped constant current power stage provides increased performance a...

Mellor Brushless DC Motor Controller. DC Motor controller is designed for use with Brushless DC motors with hall-feedback. The controller requires an external 24 V dc and can be installed using scr...

The Omron Accurax G5 servo drive is high-response frequency of 2 kHz and high resolution provided by 20 bits encoder. It has real time auto-tuning with external encoder input for full closed loop.C...

The Omron G-Series Single phase Servo Drive, with MECHATROLINK II control method, which has 100 W.Fast and accurate positioning

The Omron G-Series Single phase Servo Drive, with MECHATROLINK II control method, which has 100 W.Fast and accurate positioning

The Omron Accurax G5 series rotary drive gives extra edge to build faster, accurate, smaller and safer machines. It almost provide 25% in motor weight reduction and 50% cabinet space saving. It hel...

Phase = 1 Supply Voltage = 230 V ac Voltage Rating = 230 V Power Rating = 0.1 kW

The Omron G-series servo drives are Ultra-compact size on-line auto-tuning and Easy set up servo driver. The footprint is only 48% that of the SmartStep series and it has Adaptive filters for suppr...

The Omron G-Series Single phase Servo Drive, with Analog/Pulse control method, which has 200 W.Fast and accurate positioning

The Omron G-Series Single phase Servo Drive, with MECHATROLINK II control method, which has 200 W.Fast and accurate positioning

Phase = 1 Supply Voltage = 200 V ac Current Rating = 12 A Voltage Rating = 150 V Power Rating = 0.2 kW

Phase = 3 Supply Voltage = 200 V ac Current Rating = 12 A Voltage Rating = 150 V Power Rating = 0.2 kW

The Omron Accurax G5 series rotary drive gives extra edge to build faster, accurate, smaller and safer machines. It almost provide 25% in motor weight reduction and 50% cabinet space saving. It hel...

The Omron regenerative resistor is use with G series servo device. It has 230 W power ratting.Resistance 47 ohm

The Omron Accurax G5 servo drive is high-response frequency of 2 kHz and high resolution provided by 20 bits encoder. It has real time auto-tuning with external encoder input for full closed loop.C...

The Omron Accurax G5 series rotary drive gives extra edge to build faster, accurate, smaller and safer machines. It almost provide 25% in motor weight reduction and 50% cabinet space saving. It hel...

Phase = 1 Supply Voltage = 230 V ac Voltage Rating = 230 V Power Rating = 0.4 kW

The Omron G-series servo drives are Ultra-compact size on-line auto-tuning and Easy set up servo driver. The footprint is only 48% that of the SmartStep series and it has Adaptive filters for suppr...

The Omron Accurax G5 servo drive is high-response frequency of 2 kHz and high resolution provided by 20 bits encoder. It has real time auto-tuning with external encoder input for full closed loop.C...

The Omron G5 servo drive has 3 phase with 400 VAC. It has high-response frequency of 2 kHz and high resolution provided by 20 bits encoder. It has real time auto-tuning with external encoder input ...

The Omron Accurax G5 servo drive is high-response frequency of 2 kHz and high resolution provided by 20 bits encoder. It has real time auto-tuning with external encoder input for full closed loop.C...

The Omron Accurax G5 series rotary drive gives extra edge to build faster, accurate, smaller and safer machines. It almost provide 25% in motor weight reduction and 50% cabinet space saving. It hel...

Phase = 1 Supply Voltage = 230 V ac Voltage Rating = 230 V Power Rating = 0.75 kW

The Omron G-Series servo drive has MECHATROLINK II servo control method. It has supply voltage of 230 V and has single phase.Rated power 0.75 kW

The Omron 1S servo drive has three number of phase and supply voltage of 400 VAC.It has 9 A rated current with leakage current of 1.2 mA.Power 1.5 kW

The Omron G-Series Single phase Servo Drive, with Analog/Pulse control method, which has 800 W.Fast and accurate positioning

The Omron Accurax G5 servo drive has 200 V input voltage. It has 1 kW capacity.It has high-response frequency of 2 kHz It has high resolution provided by 20 bits encoder

The Omron Accurax G5 servo drive has 200 V input voltage. It has 1 kW capacity.It has high-response frequency of 2 kHz It has high resolution provided by 20 bits encoder

The Omron G5 servo drive has 1 phase with 230 has high-response frequency of 2 kHz and high resolution provided by 20 bits encoder. It has real time auto-tuning with external encoder input for full...

The Omron Accurax G5 servo drive is high-response frequency of 2 kHz and high resolution provided by 20 bits encoder. It has real time auto-tuning with external encoder input for full closed loop.C...

Phase = 3 Control Function = Motion Supply Voltage = 400 V ac Current Rating = 4.1 A Voltage Rating = 504 V Power Rating = 1 kW

Phase = 3 Supply Voltage = 400 V ac Voltage Rating = 400 V Power Rating = 1 kW

The Omron Accurax G5 servo drive has 400 V input voltage. It has 1 kW capacity.It has high-response frequency of 2 kHz It has high resolution provided by 20 bits encoder

Phase = 3 Supply Voltage = 200 V ac Voltage Rating = 150 V Power Rating = 1.5 kW

The Omron Accurax G5 servo drive has 200 V input voltage. It has 1.5 kW capacity.It has high-response frequency of 2 kHz It has high resolution provided by 20 bits encoder